 HomeNewsCosmetic glass bottle frosting process

Cosmetic glass bottle frosting process

2022-09-05

Sanding is the process by which,for example,Cosmetic Glass Bottle Set become less smooth,causing light to shine diffusely on the surface.In chemical frosts,glass is mechanically or manually ground with emery,silica sand,pomegranate powder,and other abrassers to form a uniform rough surface,or glass and other objects can be treated with hydrofluoric acid solution to form frosted glass.

Passionate Red Cosmetic Glass Bottle Set

Scrub is used to cover the glass surface,allowing light to scatter relatively evenly through the lampshade.

Sanding is when glass is dipped into a prepared acidic liquid(or coated with an acidic paste),and the surface of the glass is corroded with a strong acid.The ammonia fluoride in the strong acid solution makes the surface of the glass crystal.Therefore,if the sanding process is done well,the surface of the frosted glass is very smooth,and the crystals formed by scattering produce a hazy effect.If the surface is relatively rough,this indicates that the acid is severely eroding the glass,or that some of them are still crystal-free.

The process is characterized by the appearance of shiny crystals on the surface of glass formed under critical conditions.The main reason is that ammonia fluoride has almost run out.In order to achieve this state,many manufacturers have done many attempts and studies,but have not been able to overcome this difficulty.

Previous: What are the advantages of cosmetic glass lotion bottles

Next: Sandblasting process of cosmetic glass bottles